Please refer the attachment. Attachment URL:https://support.viewsonic.com/helpdesk/attachments/33010268005
NMP-302w and NMP580-W support EP5520T touch function, you can use these two models with EP5520T, then you will have touch function.
You can refer below steps to use other widgets.
Here’re major steps to set up video wall in portrait position for your reference. 1. Set up monitor ID in OSD menu as 1~4 prior to mounting monitors. 2. Connect IR sensor cable to monitor 1. 3. Connect the PC to monitor 1 with DP cable firstly for easy setup & adjustment afterwards. 4. Mounting monitor 1/2/3/4 in portrait p...
1. Download the attached license file. 2. Select the correct Time Zone. 3. Please follow the below procedures to install the Signage Manager license: license URL:https://support.viewsonic.com/helpdesk/attachments/33040907670
Product Cut in S/N EP5520T phase-in from UVE173100001 EP5520 phase-in from T91173300001
ViewSonic CDE30 Series power save modes: Which mode should i use? There are four Power Save modes to choose from and knowing which one to use depends on the application. For this scenario we will cover digital signage, information and monitoring systems and meeting rooms where always-on, wake up on active signal and fast boot time is a must...
Model Name CDM series CDE10 series CDE20 series EP5540/T EP5542/T Supported WiFi Dongle Built-in WiFi module LB-WiFi-001 LB-WiFi-001 TL-WN725N TL-WN725N TL-WN725N TL-WN725N VSB050 VSB050 VB-WIFI-001 Note: 1. WPA stands for Wi-Fi Protected Access. 2. All WiFi modules and dongles only support W...
Requirements: - USB Flash Drive (FAT32 Formatted): How to format USB flash drive to FAT32 - vSignage license file, available on the Download section of the product's page* 1. Copy the license file (license-production_VSI.PKG) to the root directory of the USB flash drive. 2. Insert the USB flash drive into USB port of the display....
1. On the Remote Control press INPUT 9 9 1 to enter factory mode. 2. Select Other Setting in the DEBUG MENU. 3. Select Boot Mode. 4. A dialog box will pop up. Select – Disable Embedded OS. 5. Press OK on the Remote Control and the system will reboot.