You can disable the “Touch and Annotate from Mobile” function in setting.
1.Please turn on player’s HDMI CEC function. 2.Connect IFP and player in HDMI cable. 3.Please turn on HDMI CEC function in “Input Setting” on IFP. <Note> Not all HDMI ports on IFP support CEC, please check UG to identify which port(s) support(s)
Applied model: 1. Americas: IFP**50 - Gen 1, IFP**50 - Gen 2, IFP**50 - Gen 3. 2. Asia Pacific & Africa: IFP**50, IFP**50-2, IFP**50-3. 3. Europe: IFP**50, IFP**50-2EP, IFP**50-3EP. Please refer either method below: 1.You will need to set combination key to “ON” at Debug menuàOther Settingà Combination key. Then the menu and inpu...
Applied model 1. Americas: IFP**50 - Gen 1, IFP**50 - Gen 2, IFP**50 - Gen 3, IFP**70 2. Asia Pacific & Africa: IFP**50, IFP**50-2, IFP**50-3, IFP**70 3. Europe: IFP**50, IFP**50-2EP, IFP**50-3EP, IFP**70 Please use remote control to enter debug menu via pressing INPUT 9 9 1 in sequence, then go to Other Setting--àUSB Disk Enable a...
Please check IFP/device/cable: 1.Check settings on IFP. a. Please check and make sure the correct input source is selected. b. Try different HDMI port on IFP. 2.Please check setting on laptop/PC. If a Windows-based notebook is connected, press "Windows Key + P" and make sure the Project settings is either on Duplicate or Ext...
1. Americas: IFP**50 - Gen 1, IFP**50 - Gen 2, IFP**50 - Gen 3. 2. Asia Pacific & Africa: IFP**50, IFP**50-2, IFP**50-3. 3. Europe: IFP**50, IFP**50-2EP, IFP**50-3EP. Please refer below steps to unlock: 1. Prepare a FAT32 formatted USB drive. 2. Unzip Unlock.zip attached and copy to the USB drive root directory. 3. Insert the USB to I...
Please find the instructions and requirements in the attached PDF. File URL:https://support.viewsonic.com/helpdesk/attachments/33039346408
Please refer to attached file to create a power on/off run script to remote control IFP 50-1(Gen. 1) ,power on/off. File URL:https://support.viewsonic.com/helpdesk/attachments/33012153643
Please refer to the attached PDF. URL:https://support.viewsonic.com/helpdesk/attachments/33046905099
Strongly recommend to have IFP50 connected by Ethernet cable and vCastSender client devices work on a stable 5G Hz Wi-Fi band, every vCastSender can input the screen PIN code for P2P connection directly no matter the panels stay at same/cross sub net network.