On some projector models, the fan will remain on after the unit has been shut down and in standby mode. This is normal operation for any model with the network feature that had been enabled. The feature can be disabled by selecting Menu>Option>Network > Off. If the Network feature is enabled then expect the fan to remain on at a lower speed w...
Applicable models:
LS600W, PG707X, PG707W, PG706HD, PG706WU, LS831WU, LS750WU, LS850WU, LS860WU, LS920WU, LS921WU, PX728-4K, PX748-4K Please make sure the below webpage password is set in ViewSonic Network control first due to SB-327 law requirement. 1. Enter the IP address of the projector in the address bar of your browser and press E...
Step 1 Download and install a Flash Player. “Download the Flash Player projector” from Adobe: https://www.adobe.com/support/flashplayer/debug_downloads.html Step 2 Input the URL of the Crestron interface in the Flash Player: http://[projector.ip]/CrestronUI.swf Where [projector.ip] is the ViewSonic projector’s IP address.
1.Please increase the Contrast and Brightness in OSD menu. 2.Check the light source level and make sure it’s on Full or Normal. 3.Turn off or reduce environmental luminance where the projector is in use.
Please refer to this FAQ.
Option 1: Download from the ViewSonic Website Go to http://www.viewsonic.com/us/downloads_section/ Enter the Product Name, Product series and model number. Select the driver based on the operating system of your computer. Once the file downloads, double-click to open and start the installation. If you select Save, double-click on the downl...
1. Here are the hardware requirements to play 3D content below. a. 3D ready projector b. 3D Blu-Ray player c. 3D content d. Active 3D glasses 144Hz e. HDMI Premium Certificate cable 2. Here is the playback process below. a. Connect the 3D Blu-Ray player to the 3D capable projector via HDMI cable. b. T...
There are 2 ways to mirror from iPad, iPhone (4 or later), or iPod Touch (4th Gen or later): 1. Use an Apple original "Lightning Digital AV Adapter" or "USB-C Digital AV Multiport Adapter" to connect your device to a ViewSonic projector. You might encounter no signal if you don’t use APPLE original adapter. 2.If your projector is equipp...
Analog extension cables, adapters, docking stations and longer cables may be prone to generate ghosting, lines, double images, or poor focus. The improper shielding of the extension cables will cause a shadowing or ghosting effect due to mismatch of the input impedance between the video source, the video cable, and the projector. Please use th...
1. Press the menu button on the projector or the remote control and then navigate to the Advanced Settings. 2. Select to restore factory default settings. Note: Some models may have the reset option in a slightly different location. Please check the user guide for specific steps.