How can I lock the touch function on IFP5550/IFP6550/ IFP7550/IFP8650?

Applied model:   1. Americas: IFP**50 - Gen 1, IFP**50 - Gen 2, IFP**50 - Gen 3.  2. Asia Pacific & Africa: IFP**50, IFP**50-2, IFP**50-3. 3. Europe: IFP**50, IFP**50-2EP, IFP**50-3EP.   Please refer either method below:   1.You will need to set combination key to “ON” at Debug menuàOther Settingà Combination key.   Then the touch fun...

How do I wake up my IFP50 series in standby mode?

IFP50 has a feature of “Wake on active source” to wake up from standby mode when there is an external HDMI/VGA signal input.   Supported input sources:   1.IFP50-1/Gen 1 and 50-2/Gen 2/50-2 EP: HDMI and VGA 2.IFP50-3/Gen 3: HDMI.

How do I configure on IFP and use player to power IFP on and off by HDMI CEC?

1.Please turn on player’s HDMI CEC function.  2.Connect IFP and player in HDMI cable.  3.Please turn on HDMI CEC function in “Input Setting” on IFP. <Note> Not all HDMI ports on IFP support CEC, please check UG to identify which port(s) support(s)

How to prevent from annotate on ViewBoard Cast by mobile devices?

You can disable the “Touch and Annotate from Mobile” function in setting.

Where can I get more info for suitable slot-in PC with IFP7550?

Please visit product page of IFP7550 in our website and check the section of "RELATED ACCESSORIES" list for details.

What to do as it shows a warning message “Program not activated, will exit in 30 minutes” when running vBoard?

vBoard will be activated automatically while Internet in connected. Please make sure your IFP display is well connected to Internet.

What to do if an error message "No signal" appears on my IFP while connecting to an external device?

Please check IFP/device/cable:   1.Check settings on IFP. a. Please check and make sure the correct input source is selected. b. Try different HDMI port on IFP.   2.Please check setting on laptop/PC.    If a Windows-based notebook is connected, press "Windows Key + P" and make sure the Project       settings is either on Duplicate or Ext...

How do I disable the Embedded Player in IFP7550/IFP5550/IFP6550/IFP8650?

Applied model 1. Americas: IFP**50 - Gen 1, IFP**50 - Gen 2, IFP**50 - Gen 3, IFP**70 2. Asia Pacific & Africa: IFP**50, IFP**50-2, IFP**50-3, IFP**70 3. Europe: IFP**50, IFP**50-2EP, IFP**50-3EP, IFP**70   Please follow below instructions to disable the Embedded Player.   Press INPUT 9 9 1 in sequence on the remote to enter the Debug M...

How can I remotely control IFP to power on and off(standby)?

You can remotely control IFP with RS232 cable or Lan cable by ViewSonic vController.   <Note> To power on via Lan may work by model wise and needs to set IFP standby mode to sleep. Please check specification and UG if it supports.

Is it possible to select different time zone for date

The default time zone is +8 which can be changed at the initial setting stage by Set up wizard of ViewBoard Launcher. It will be auto sync-up later with internet connection.