How to adjust the image size on a projector?

  The projector's image size is determined by the distance between the projector itself and the screen.   You can adjust the screen size by repositioning the projector, the image size and the distance needed will be shown in the projector user's manual.   Some projectors also come with a zoom ring for the finer adjustment.

How to clean the projector lens

To clean the projector lens, do the following: Apply a non-abrasive camera lens cleaner to a soft, lint-free cloth. Do NOT spray the cleaner directly onto the lens. Avoid abrasive cleaners/solvent, as they may permanently damage the lens. In a circular motion gently wipe the lens clean. Replace lens cap if projector is not to be used.

The AC adapter for the projector does not work

Verify adapter plugged into a wall outlet Make sure the AC adapter is firmly and securely plugged into the wall outlet.  Although it may sound obvious, the adapter can become loose without even knowing.  If it's not plugged in all the way, it can make it seem like the adapter is not working, but it may just not be getting power from the wall...

How to mirror an iPad or an iPhone screen to a projector?

There are 2 ways to mirror from iPad, iPhone (4 or later), or iPod Touch (4th Gen or later):   1. Use an Apple original "Lightning Digital AV Adapter" or "USB-C Digital AV Multiport Adapter" to connect your device to a ViewSonic projector. You might encounter no signal if you don’t use APPLE original adapter.   2.If your projector is equipp...

How to change the projector lamp in a projector?

The methods for changing the projector lamp (bulb) differ depending on the model of the projector. For accurate instructions, you can find lamp swapping instruction at ViewSonic product download page.   <Note> It is recommended that you use an authentic ViewSonic replacement lamp.  

Purchased replacement parts

Parts can be purchased from our parts store. Go to https://www.viewsonic.com/parts/

What devices support USB Type C video streaming on M1, M1+, M2 and X10-4K?

The USB Type-C port on your device must support DP Alt mode (DisplayPort Alternative Mode on USB-C). USB Type-C refers to the connector type, not the capability of the port itself, and please note that not all USB Type-C ports support video output (Video over USB Type-C). USB Type-C ports with any of the following symbols nearby will be...

How to set up dual projectors on a Windows computer?

Before connecting two projectors to your Windows PC/laptop, please ensure your system can run multiple video outputs. 1. To check your graphics card's maximum number of output signals, please refer to the graphics card manufacturer like the example below. Dedicate Graphics Card Integrate Graphics Card  2. Make sure your devi...

What's the duration of Security Update Support for ViewSonic Consumer Projectors?

ViewSonic will offer security update support to the below consumer projector products in compliance with the UK’s Consumer Connectable Product Security Regime until the dates specified below. Product End of Support LS741HD/   VS19894/ CPD60HD/ HC60HD/ T60HD/ KL60HD/ V60HD/ LS741HDE/ LS741HDP/ LS741HDC/   LS751HD/ VS19337/ CPD42HD/ ...

Why am I unable to do wireless casting from my laptop via PJ-WPD-700?

For wireless casting via PJ-WPD-700, it's necessary to connect to an USB-C port of laptop/desktop which supports DP Alt mode (DisplayPort Alternative Mode on USB-C). USB Type C refers to the connector type, but not the capability of the port itself. Also, not all USB Type C ports support video output (Video over USB Type C). USB-C ports...