There are 2 ways: 1.On Monitor, please navigate to OSD -> Setup Menu -> Information, where you will see your current firmware version. **For VP2468 versions M001 and M002, this function is not supported. If the firmware version is not present in the Information page, please update to version M010 or later. 2. On PC/Laptop, you ...
Please make sure to connect PC to the DisplayPort input instead of the DisplayPort output port on the monitor. If your graphic card is capable of DisplayPort 1.1, please follow these steps and adjust monitor setting: “Menu >> Setup Menu >> DisplayPort 1.2 Off”.
You can set the Orientation setting to Landscape/CW90°/CCW90° or disable the “Auto Pivot” application.
The 4 USB ports support 5V 900mA Apple device power charging. The fourth downstream USB port can support device charging while the display is on “standby mode”, but all other ports will only charge devices while the display is “on”. As of Dec. 11 2020, VP models support standby model with charging function via 2.1A USB port of monito...
Please refer to below table: Model Qty Native Resolution VP2468 4 1080P VP2468a VP2768 VP2768a VP2785-2K VP2771 VP2775 2 2*1440P 3 1*1440P+2*1080P
The Auto-Pivot function uses DDC/CI to communicate with the monitor. Please make sure not to turn off the monitor’s DDC/CI option in the OSD menu when you are using the Auto Pivot function.
This is a normal occurrence for In-Plane Switching (IPS) monitor panels. The longer an image is left static on the screen, the more noticeable image retention will be. In order to prevent image retention, enable the screen saver function on your monitor so that images are not static on your screen for extended periods of time.
The input source auto detect function is only supported by specific model of monitors. Please refer to the user guide to confirm this feature. If your monitor supports this feature, it will be disabled by default. Please make sure to enable it within the OSD menu.
For optimal performance, please make sure your monitor is fully up to date. If your VP2468 monitor’s firmware version is M001 or M002, please make sure your OSD Pivot and Auto-Pivot functions are, both, set to Auto.
The monitor’s OSD pivot function is only effective for the OSD window itself. Additionally, the vDisplay Manager software will be required for the operating system to automatically adjust the monitor’s orientation.