IFP105S - Why Is My OPS showing no Signal After the Firmware Update?

IFP105S - No signal


With the latest firmware version 20240429, the OPS EDID is set to 5K by default. 


This setting may cause a "No Signal" issue after the firmware update when using the VPC25 or other OPS.

To resolve this issue, we have added a switch in the Android settings that allows the EDID to be set to 4K to solve the No signal.


For reference where to find the option:



Ultima modificare: iul. 2024

Contactează-ne

Contactează-ne direct dacă nu poți obține răspunsurile și soluțiile pentru produsele tale ViewSonic.