Why isn't there any response while trying to connect IFP5550/IFP6550/IFP7550/IFP8650 by RS232?

1. A RS232 crossover cable and a RS232 adapter are included in the package of IFPxx50 series. Make sure to install both RS232 cable and adapter. 2. Make sure to set the communication settings below correctly     - Baud Rate Select: 9600bps (fixed)     - Data bits: 8 bits (fixed)     - Parity: None (fixed)     - Stop Bits: 1(fixed)  3.If...

How do I remote control IFP5550/6550/7550/8650-1 (Gen. 1) power on/off via SureMDM?

Please refer to attached file to create a power on/off run script to remote control IFP 50-1(Gen. 1)  ,power on/off. File URL:https://support.viewsonic.com/helpdesk/attachments/33012153643

How can I recovery VPC14-WP or VPC10-WP Windows OS?

You  can use the Recovery button that locate at VPC front panel to recovery the OS system.

What to do when the IFP firmware update process failed and cannot enter the system?

1. Find your product's model number and visit ViewSonic's website to download the firmware. 2. Save the *.zip file to a local disk. 3. Extract the firmware files to a USB drive. a. For Gen. 1 units (IFPxx50), extract 'upgrade_510’ folder to the root of your USB drive (FAT32).  b. For Gen. 2 units (IFPxx50-2/IFP50-2 EP), extract ‘upgrade_5...

What is the USB Type-C specification and video streaming compatible device by IFP6570 and IFP8670?

ViewSonic’s IFP6570 and IFP8670 USB Type-C port supports the below specifications: 1. DP alt mode: supported with DP1.4 (4K@60hz) 2. Power delivery specification: 60W (5V3A、9V3A、12V3A、15V3A、20V3A) 3. USB data transfer rate specification: USB 2.0 (480 Mbps) Note: USB Type-C refers to the connector type, not the capability of...

What to do if I want to power on IFP50 by RS232 LAN command?

1. You need to switch the Standby Mode to "Sleep" On IFP50. Please refer to this FAQ if you can not switch to this mode. 2. You can now use RS232 LAN command to power On/Off the IFP50 series.

How can I freeze CDE7500/CDE8600 screen?

 You can press FREEZE button on remote control to freeze the screen.

What to do if IFP50 sleep option is grey out?

Applied model 1. Americas: IFP**50 - Gen 1, IFP**50 - Gen 2, IFP 9850-3 2. Asia Pacific & Africa: IFP**50, IFP**50-2, IFP 9850-3 3. Europe: IFP**50, IFP**50-2EP,. IFP 9850-3 EP Please update IFP to the latest FW version via OTA or by USB file from ViewSonic website. Then you can select sleep without key file.

How can I replace the IFP50 series’ boot up image and animation?

Please find the instructions and requirements in the attached PDF. File URL:https://support.viewsonic.com/helpdesk/attachments/33039346408

What to do if ViewBoard 2.1 shows “Trial” status?

ViewBoard 2.1 will automatically be activated when PC/laptop connects to IFP50/70 with an USB touch cable or please purchase a key to get it activated permanently.