If you want slot-in pc stay powered on, short press the power button on the front panel or remote control to manually turn off the screen(backlight).
We suggest refer to one of below cleaning methods. 1. Use the Side Tool Bar to clean all current processes. 2. Use vSweeper to clear memory and unwanted files. 3. Power off the Viewboard, then power it back on to clear all unnecessary data and close any running procedures. Note: Using Browser/Chromium to play 1080...
1. A RS232 crossover cable and a RS232 adapter are included in the package of IFPxx50 series. Make sure to install both RS232 cable and adapter. 2. Make sure to set the communication settings below correctly - Baud Rate Select: 9600bps (fixed) - Data bits: 8 bits (fixed) - Parity: None (fixed) - Stop Bits: 1(fixed) 3.If...
You can use the Recovery button that locate at VPC front panel to recovery the OS system.
Below apps will be displayed in the ViewBoard vLauncher with firmware date after Jan/2021.
ViewSonic’s IFP6570 and IFP8670 USB Type-C port supports the below specifications: 1. DP alt mode: supported with DP1.4 (4K@60hz) 2. Power delivery specification: 60W (5V3A、9V3A、12V3A、15V3A、20V3A) 3. USB data transfer rate specification: USB 2.0 (480 Mbps) Note: USB Type-C refers to the connector type, not the capability of...
1. You need to switch the Standby Mode to "Sleep" On IFP50. Please refer to this FAQ if you can not switch to this mode. 2. You can now use RS232 LAN command to power On/Off the IFP50 series.
Please refer to this video.
You can remotely control IFP with RS232 cable or Lan cable by ViewSonic vController. <Note> To power on via Lan may work by model wise and needs to set IFP standby mode to sleep. Please check specification and UG if it supports.
You can press FREEZE button on remote control to freeze the screen.