What can I do if the Viewboard is lagging?

We suggest refer to one of below cleaning methods.   1. Use the Side Tool Bar to clean all current processes.      2. Use vSweeper to clear memory and unwanted files.     3. Power off the Viewboard, then power it back on to clear all unnecessary data and close any running procedures.     Note: Using Browser/Chromium to play 1080...

Why isn't there any response while trying to connect IFP5550/IFP6550/IFP7550/IFP8650 by RS232?

1. A RS232 crossover cable and a RS232 adapter are included in the package of IFPxx50 series. Make sure to install both RS232 cable and adapter. 2. Make sure to set the communication settings below correctly     - Baud Rate Select: 9600bps (fixed)     - Data bits: 8 bits (fixed)     - Parity: None (fixed)     - Stop Bits: 1(fixed)  3.If...

Why can't I adjust the Hue and Sharpness settings on the slot-in PC and HDMI source?

The Hue and Sharpness settings are only adjustable for the Analog source such as AV in /VGA source.

What to do when: "Machine Code: 667406643860" shows up on my Viewboard after a reset?

This happens because vCast requires a license key to activate. Please ensure your Viewboard is connected to the internet to get “Registration OK” to show on screen to work.

How can I recovery VPC14-WP or VPC10-WP Windows OS?

You  can use the Recovery button that locate at VPC front panel to recovery the OS system.

What to do when the IFP firmware update process failed and cannot enter the system?

1. Find your product's model number and visit ViewSonic's website to download the firmware. 2. Save the *.zip file to a local disk. 3. Extract the firmware files to a USB drive. a. For Gen. 1 units (IFPxx50), extract 'upgrade_510’ folder to the root of your USB drive (FAT32).  b. For Gen. 2 units (IFPxx50-2/IFP50-2 EP), extract ‘upgrade_5...

Where do I find IFP50/30/70 series touch driver for Mac?

Please download the touch driver for Mac in below link or visit the product page on our website.    IFP 50-1/50 Gen 1: Download IFP 30: Download IFP 50-2/50-2 EP/50 Gen2/50-3/50-3A/50-3B/50-3 Gen 3/70: Download

What is the USB Type-C specification and video streaming compatible device by IFP6570 and IFP8670?

ViewSonic’s IFP6570 and IFP8670 USB Type-C port supports the below specifications: 1. DP alt mode: supported with DP1.4 (4K@60hz) 2. Power delivery specification: 60W (5V3A、9V3A、12V3A、15V3A、20V3A) 3. USB data transfer rate specification: USB 2.0 (480 Mbps) Note: USB Type-C refers to the connector type, not the capability of...

What to do if I want to power on IFP50 by RS232 LAN command?

1. You need to switch the Standby Mode to "Sleep" On IFP50. Please refer to this FAQ if you can not switch to this mode. 2. You can now use RS232 LAN command to power On/Off the IFP50 series.

How can I remotely control IFP to power on and off(standby)?

You can remotely control IFP with RS232 cable or Lan cable by ViewSonic vController.   <Note> To power on via Lan may work by model wise and needs to set IFP standby mode to sleep. Please check specification and UG if it supports.