What to do when there is touch inaccuracy of the TD monitor under Windows 10?

Please do touch calibrate follow below steps:   1. Move your mouse cursor to the bottom left of the screen. Right mouse click the Windows icon, then left mouse click “Run”.     2. Key in or copy:  shell:::{80F3F1D5-FECA-45F3-BC32-752C152E456E}  and select "OK".     3. The Tablet PC Settings will show up as below. You can select TD m...

Why sharpness setting in OSD menu is grey out on my XG2702 and VA2719-2K-SMHD?

When resolution is set in native resolution (1:1), both Sharpness and Overscan option in OSD will be grey out.

How to set proper Response Time with Viewsonic monitors?

Response time option can be selected under different View Mode. Viewmode => Standard => Response time => Standard / Advanced / Ultra fast  Viewmode => Game => Response time => Standard / Advanced / Ultra fast In both cases, while selecting the “Advanced” or even “Ultra fast”, it brings a very strong ghosting effect and blurry while scro...

What is "Black stabilization" and which level should I choose?

This setting is to provide better picture performance if user’s screen are mostly dark scenes. If no special needs(ex: playing shooting games in dark scenes), it is suggested to turn off.

Why can't I choose Contrast or Brightness?

ViewSonic develops several preset modes (ViewMode) such as Game/Movie, etc. These presets are specifically designed to deliver an optimized viewing experience for different screen applications.   Under specific preset modes, some settings are fixed and cannot be adjusted. Please set to “Standard” mode if you want to adjust.

How to manually install LED monitor drivers under Win10 64-bits?

If you're not able to install your monitor drivers with the driver pack "Standard Monitor Driver Signed Windows 10 x64 " downloaded from ViewSonic website, please follow below instruction to manually install Win10 x64 driver. 1. Download the attached ZIP file including monitor drivers to your PC and extract it. 2. Under "Control Panel",...

How to set maximum resolution for my monitor?

Please refer to this FAQ section 1 and set to recommended display resolution.

Why is there high pitched noise from my monitor?

In normal operating conditions, there might be normal electric current sound came monitor which should not impact on your usage.   If this did not occur in the past but appeared recently, please contact ViewSonic service center.

How to solve the overscan problem with my monitor?

If the image does not fill the screen of the monitor or if it looks like the image is slightly too big for the monitor, try below suggestion.   1.Adjust setting on the PC/laptop:   (1)Set native resolution of monitor in your PC/laptop's Display settings.   (2)Change Scaling in Display settings.   Use the graphic card software to change ...

Which Cable Do I Need For 144Hz?

To output:   1.1080p content at 144Hz, you will need either a dual-link DVI, a DisplayPort, or an HDMI 1.3 or higher cable.    2. 1440p at 144Hz, you will need at least an HDMI 2.0 or a DisplayPort 1.2 cable.   3.4K at 144Hz, you will need a HDMI 2.1 or a DisplayPort 1.4 cable which can carry 120Hz signal without compression.