How to Disable the Android System on the CDE20 Series.

1. On the Remote Control press INPUT 9 9 1 to enter factory mode. 2. Select Other Setting in the DEBUG MENU. 3. Select Boot Mode. 4. A dialog box will pop up. Select – Disable Embedded OS. 5. Press OK on the Remote Control and the system will reboot. 

How to upgrade the firmware on Stand type EPoster, EP5520/EP5520T, EP5540/EP5540T, EP5542/EP5542T?

1. Format the USB disk as FAT32. 2. Unzip the “MstarUpgrade_848.zip” and then copy the .bin file to the USB disk (FAT32) in the root directory. 3. In Android mode, press the Source menu button, then press INPUT 9 9 1 to open the Service Menu. 4. Select "Firmware Update" and press OK.  5. Select "Upgrade Main" and press OK. ...

How to find MAC address of EP5520/EP5520T/ EP5540 /EP5540T?

MAC address is available on a label outside the carton as below. If carton is not available, check it under Android system with details below. 1. Press HOME on RC and select Settings 2. Select Network 3. Select Ethernet 4. MAC address listed as below

How to disable vSignage SW in EP5520 /EP5520T/ EP5540/ EP5540T?

Please press the "MENU" button on the remote controller to enter the setting page and then set "vSigange" to “OFF”. .

How to customize an Android Boot Animation on CDExx10 series and CDM models?

1. Overview The "Android Boot Animation" is a script used to load PNG files when the device boots. It is contained within an uncompressed zip file called bootanimation.zip. 2. Inside the bootanimation.zip file The bootanimation.zip file contains: The image folder(s) (containing PNG images named by incremental numbers) The desc...

How many touch points can I get from a multi-touch display on CDE models with touch?

Please refer to below table:   OS/Model/touch points CDE**61T CDE8452T Win 7  (except Starter and Home Basic)  Win 8/8.1/10 20 points touch  10 points writing 10 points touch  5 points writing Linux (Kernel >=2.6.32 by patch)  (Kernel >=3.5) 20 points touch  10 points writing 10 points touch  5 points writing An...

How can I add my city in Weather widget in Signage Manager software?

You can refer to below link, enter the country, find the city name. http://www.worldweatheronline.com/country.aspx     Then enter it directly.    

What network port shall be opened for Signage Manager and media player such as NMP-302W?

Signage Manager communicates with media players through local area network (LAN). Please make sure below ports are opened & not blocked. Port TCP UDP Description 80 TCP Hypertext Transfer Protocol (HTTP), main communication port with legacy players (e.g. NMP-302w, NMP580-W, EP1031, EP1032, EP1042T, CDM4300R, CDM4900R,...

What are the communication settings to control IFP via RS232 and LAN commands?

RS232 Communication Setting  - Baud Rate Select: 9600bps (fixed) - Data bits: 8 bits (fixed) - Parity: None (fixed) - Stop Bits: 1(fixed)   LAN Communication Setting - Type: Ethernet  - Protocol: TCP/IP - Port: 5000 (fixed) - Cross subnet: No - Logon Credentials: No

How to install APP on NMP-302W?

Applied model:  NMP-302W, NMP580-W, EP1042T 1. Click "Advanced" to enter advanced settings page. 2. Click left mouse key three times in the right bottom area with interval of one second 3. Then Android main page will appear 4. Click "Settings" to enter settings page 5. Check "Unknown source" under "Security" setting...