In normal operating conditions, there might be normal electric current sound came monitor which should not impact on your usage. If this did not occur in the past but appeared recently, please contact ViewSonic service center.
No, as Linux system should automatically identify and recognize the monitor.
Please refer to the video on how to change: https://www.youtube.com/watch?v=sAkbjPiLNcE
Please refer to this FAQ, find "Calibrate your display" section and follow the instruction.
These models are optical touch monitors which use two CMOS cameras (optical sensors) placed in the corners at the top of the screen as well as three reflectors (light strips). These cameras are used to look across the entire touch surface for touch events. When an object touches the screen, it blocks some of the light being received by the se...
The new gaming consoles from Sony and Microsoft support video ouput up to 120Hz. Please follow below instructions to enable 120Hz on your console. <PlayStation 5> 1. Open "Settings". 2. Select "Screen and Video". 3. Select "Enable 120 Hz Output" in "Video Output". 4. Select "Automatic" in the pop-up menu. ...
To use AMD Freesync, there're some requirement with graphics cards, graphics drivers and certified monitors. 1. A compatible GPU with a DisplayPort connection. Compatible GPUs include all AMD Radeon™ graphics cards beginning with Radeon™ HD 7000 Series, released in 2012, and all newer Radeon consumer graphics products.Other GPUs, such ...
You can navigate to manual Image adjust on OSD menu. Select Overclocking -> 165Hz.
Can I Calibrate my sRGB or AdobeRGB monitor’s Luminance value below 80cd/m^2? NO
Why does brightness go down on VP2785-4K after calibration? Because on VP2785-4K, Energy saving is set to ON by default for power saving. Please turn off the Energy saving to OFF and proceed with calibration.