Do the VP2468’s USB ports support Apple device power charging?

The 4 USB ports support 5V 900mA Apple device power charging. The fourth downstream USB port can support device charging while the display is on “standby mode”, but all other ports will only charge devices while the display is “on”. As of Dec. 11 2020, VP models support standby model with charging function via 2.1A USB port of monito...

How to check the monitor’s current firmware version?

There are 2 ways:   1.On Monitor, please navigate to OSD -> Setup Menu -> Information, where you will see your current firmware version.   **For VP2468 versions M001 and M002, this function is not supported. If the firmware version is not present in the Information page, please update to version M010 or later.     2. On PC/Laptop, you ...

How many monitors can I connect when utilizing the Daisy Chain connection on VP series?

 Please refer to below table:   Model Qty Native Resolution VP2468 4 1080P VP2468a VP2768 VP2768a VP2785-2K VP2771  VP2775 2 2*1440P 3 1*1440P+2*1080P  

Why is my monitor not detected by the Firmware Update Tool?

Please make sure to use “FW_Update_Tool_v1.08”. Please follow the step by step instructions below to resolve the problem. When the program is initialized, the error message shown below will appear. A Windows error message might also pop up few seconds later. Please close the program and the error messages, then follow the in...

Why can’t my Windows desktop rotate to match the monitor’s orientation when OSD pivot function is set to Auto?

Since OSD pivot function in the OSD menu only affects the OSD menu itself. Please also install vDisplay Manager in your operating system so that your operating system screen can automatically rotate with the monitor’s orientation.

Minor image retention may occur when a static image is displayed on the screen for extended periods of time.

This is a normal occurrence for In-Plane Switching (IPS) monitor panels. The longer an image is left static on the screen, the more noticeable image retention will be.  In order to prevent image retention, enable the screen saver function on your monitor so that images are not static on your screen for extended periods of time.

Do VP series monitors support an Apple MAC Thunderbolt connection?

You can refer to this article to identify the port of your Mac device. Identify the ports on your Mac  1.Mac with Thunderbolt 2:  Please use a mini DisplayPort cable to connect between your Mac to VP monitor’s mini DP or DP input.   2.Mac with Thunderbolt 3:    Please use a Thunderbolt 3 or USB Type-C cable capable of DP ALT mode betw...

Why can’t my monitor automatically detect a source?

The input source auto detect function is only supported by specific model of monitors. Please refer to the user guide to confirm this feature. If your monitor supports this feature, it will be disabled by default. Please make sure to enable it within the OSD menu.

How to set the OSD pivot feature to auto when it is greyed out in the OSD menu?

Temporarily select a different OSD rotation option and then set the Auto option again. If the option is still greyed out, apply All Recall from the monitor’s OSD Setup Menu.

Why is the auto-pivot function not able to detect my monitor’s orientation?

The Auto-Pivot function uses DDC/CI to communicate with the monitor.  Please make sure not to turn off the monitor’s DDC/CI option in the OSD menu when you are using the Auto Pivot function.