To obtain better image quality, please set the resolution at least at 1920x1080.
Yes, IFP7550 can play 4K2K content.
Installation height will depend on a number of factors like average height of users and size of the room. For example, students in elementary schools will have a lower average height compared to high school. Another option will be to mount it on an adjustable mobile trolley cart like our LB-STND-005-3 that can be adjusted to multiple heigh...
Please refer to attached file to create a power on/off run script to remote control IFP 50-1(Gen. 1) ,power on/off. File URL:https://support.viewsonic.com/helpdesk/attachments/33012153643
IFP50 has a feature of “Wake on active source” to wake up from standby mode when there is an external HDMI/VGA signal input. Supported input sources: 1.IFP50-1/Gen 1 and 50-2/Gen 2/50-2 EP: HDMI and VGA 2.IFP50-3/Gen 3: HDMI.
This happens because vCast requires a license key to activate. Please ensure your Viewboard is connected to the internet to get “Registration OK” to show on screen to work.
Yes, the HDMI out on the IFP7550 will show the annotations on the second display.
Please refer to the attached PDF. URL:https://support.viewsonic.com/helpdesk/attachments/33046905099
IFP7550 USB port 3.0 supports external HDD up to 4TB. Below models had pass the read/write test. WD: WDBUY0040BBK(4TB) SEAGATS: STDR2000301(2TB) TOSHIBA: HDTC810YR3AA(1TB) SONY: HD-E1(1TB)
You can remotely control IFP with RS232 cable or Lan cable by ViewSonic vController. <Note> To power on via Lan may work by model wise and needs to set IFP standby mode to sleep. Please check specification and UG if it supports.