Since OSD pivot function in the OSD menu only affects the OSD menu itself. Please also install vDisplay Manager in your operating system so that your operating system screen can automatically rotate with the monitor’s orientation.
Please open the OSD menu and navigate into “Input Select”. Then, select Auto-Detect and make sure it is set to ON.
For the best display performance and to resolve any known issues, it is best to keep your monitor updated with the latest firmware version. With the USB cable and firmware update tool, you can easily update your monitor firmware any time. To update the firmware, do the following: 1. Click on the Advanced sub-menu, then Information. ...
Please make sure to connect PC to the DisplayPort input instead of the DisplayPort output port on the monitor. If your graphic card is capable of DisplayPort 1.1, please follow these steps and adjust monitor setting: “Menu >> Setup Menu >> DisplayPort 1.2 Off”.
There are 2 ways: 1.On Monitor, please navigate to OSD -> Setup Menu -> Information, where you will see your current firmware version. **For VP2468 versions M001 and M002, this function is not supported. If the firmware version is not present in the Information page, please update to version M010 or later. 2. On PC/Laptop, you ...
You can refer to this article to identify the port of your Mac device. Identify the ports on your Mac 1.Mac with Thunderbolt 2: Please use a mini DisplayPort cable to connect between your Mac to VP monitor’s mini DP or DP input. 2.Mac with Thunderbolt 3: Please use a Thunderbolt 3 or USB Type-C cable capable of DP ALT mode betw...
Please make sure to use “FW_Update_Tool_v1.08”. Please follow the step by step instructions below to resolve the problem. When the program is initialized, the error message shown below will appear. A Windows error message might also pop up few seconds later. Please close the program and the error messages, then follow the in...
There are two methods to re-start this service that may fix the issue: 1. Uninstall vDisplay Manager, and reinstall it, try to launch vDisplayManager again. 2. Press the “Windows Key + R” to open the “Run” window, and input “services.msc”. Find “Realtek Hub Wakeup Service”, and start it. If there is a warning messag...
The model of the monitor will determine how many screens can be supported, and how the screen is divided. Screen Division Model Support 4 screens VP2785-4K VP3268-4K VP3481 VP3881 2 screens VP2771
vDisplay Manager improves your productivity and puts the On-Screen Display (OSD) Menu controls on your monitor’s screen. Here you can quickly and easily adjust the monitor’s display, increase user efficiency, and make your viewing experience more comfortable.