1.Under "Control Panel", open "Device Manager". 2. Find the Display adapters and double click on it then double click on the device shown: 3.Select Driver tab, this will list the Driver version.
1.If the line location is not fixed, please check and adjust firstly by following below methods: (1) Check the video cables and/or another video input. Make sure the cable is securely connected and if possible, change the cable. (2) Use another power outlet. (3) Connect the monitor to another computer. 2. If the line location is...
ViewSonic plug and play monitors do not require a proprietary Windows 10 driver to be installed. Instead, Windows 10 will automatically read the EDID information stored in the monitor and install Generic PNP Monitor drivers to enable its full resolution capabilities. The only difference is you will see monitor model name in Device Manag...
In normal operating conditions, there might be normal electric current sound came monitor which should not impact on your usage. If this did not occur in the past but appeared recently, please contact ViewSonic service center.
When using a monitor in the digital (HDMI, DisplayPort) connection, Auto Image Adjust and Manual Image Adjust settings may be disabled. This is normal as the monitor will adjust itself when in the digital mode.
If the image doesn’t fit the screen, please do the following: 1.Check the applied resolution to make sure that they match the settings recommended in the user guide. To check the resolution in Windows: (1)Settings > Display > Click on the display that user wants to change the setting (2)Change the display resolution for ...
Please refer to this FAQ section 1 and set to recommended display resolution.
Please follow below steps: Open OSD menu: (1) For monitors with [1] and [2] buttons on the front panel, press the number “1” button on the monitor. (2) For monitors with buttons behind the monitor, press the second button from the top. (3) For monitors with a joystick...
These models are optical touch monitors which use two CMOS cameras (optical sensors) placed in the corners at the top of the screen as well as three reflectors (light strips). These cameras are used to look across the entire touch surface for touch events. When an object touches the screen, it blocks some of the light being received by the se...
No, as Linux system should automatically identify and recognize the monitor.