How can I lock the touch function on IFP5550/IFP6550/ IFP7550/IFP8650?

Applied model:   1. Americas: IFP**50 - Gen 1, IFP**50 - Gen 2, IFP**50 - Gen 3.  2. Asia Pacific & Africa: IFP**50, IFP**50-2, IFP**50-3. 3. Europe: IFP**50, IFP**50-2EP, IFP**50-3EP.   Please refer either method below:   1.You will need to set combination key to “ON” at Debug menuàOther Settingà Combination key.   Then the touch fun...

Is there any recommended slot-in PC which can support vPro and TPM?

VPC14-WP-x and VPC12-WP-x can support both Intel® vPro and TPM 2.0.

How do I configure on IFP and use player to power IFP on and off by HDMI CEC?

1.Please turn on player’s HDMI CEC function.  2.Connect IFP and player in HDMI cable.  3.Please turn on HDMI CEC function in “Input Setting” on IFP. <Note> Not all HDMI ports on IFP support CEC, please check UG to identify which port(s) support(s)

Is it possible to select different time zone for date

The default time zone is +8 which can be changed at the initial setting stage by Set up wizard of ViewBoard Launcher. It will be auto sync-up later with internet connection.

What are the ViewBoard Network Requirements?

Please refer to the attached PDF. URL:https://support.viewsonic.com/helpdesk/attachments/33046905099

How to make sound output from external speaker bypass integrated speaker in IFP30/50 series?

Please connect an audio cable from the AUDIO OUT connector on the IFP30/50 to an external amplifier or active speaker with a power adapter.

How to prevent from annotate on ViewBoard Cast by mobile devices?

You can disable the “Touch and Annotate from Mobile” function in setting.

How do I disable the Embedded Player in IFP7550/IFP5550/IFP6550/IFP8650?

Applied model 1. Americas: IFP**50 - Gen 1, IFP**50 - Gen 2, IFP**50 - Gen 3, IFP**70 2. Asia Pacific & Africa: IFP**50, IFP**50-2, IFP**50-3, IFP**70 3. Europe: IFP**50, IFP**50-2EP, IFP**50-3EP, IFP**70   Please follow below instructions to disable the Embedded Player.   Press INPUT 9 9 1 in sequence on the remote to enter the Debug M...

How do I wake up my IFP50 series in standby mode?

IFP50 has a feature of “Wake on active source” to wake up from standby mode when there is an external HDMI/VGA signal input.   Supported input sources:   1.IFP50-1/Gen 1 and 50-2/Gen 2/50-2 EP: HDMI and VGA 2.IFP50-3/Gen 3: HDMI.

What to do when the touch function gets no response from all input sources on my IFP5550, IFP6550, IFP7550, IFP8650?

Applied model 1. Americas: IFP**50 - Gen 1, IFP**50 - Gen 2, IFP**50 - Gen 3,  IFP70 2. Asia Pacific & Africa: IFP**50, IFP**50-2, IFP**50-3, IFP70 3. Europe: IFP**50, IFP**50-2EP, IFP**50-3EP, IFP70   Please press the following front panel button combination in sequence to unlock the touch function.   “VOL+”, “VOL+”, “VOL+”, “SETT...