What to do when there is no display from my monitor?

Please make sure the monitor’s power cable is properly seated in the port and that the monitor is powered on. By default LED indicator will light up when the monitor is powered on. If no LED indicator lights up, please try another power outlet first.   If above doesn’t help, please contact ViewSonic service center. 

How to set maximum resolution for my monitor?

Please refer to this FAQ section 1 and set to recommended display resolution.

Is there Linux drivers for my monitor?

No, as Linux system should automatically identify and recognize the monitor.

Should I install Windows 10 drivers for my monitor?

ViewSonic plug and play monitors do not require a proprietary Windows 10 driver to be installed.   Instead, Windows 10 will automatically read the EDID information stored in the monitor and install Generic PNP Monitor drivers to enable its full resolution capabilities.   The only difference is you will see monitor model name in Device Manag...

How to change refresh rate in windows 10?

Please refer to the video on how to change: https://www.youtube.com/watch?v=sAkbjPiLNcE

What to do when no video by using HDMI port?

If you are experiencing problems using HDMI input, suggest do the followings:   Please check below on monitor:   Make sure the correct HDMI input is selected in OSD. Turn on the monitor first then PC.   Please check below on PC:    Test the monitor on a different computer with a HDMI port. Replace another HDMI cable. If...

Why does image persistence occur with my LCD monitor?

Image persistence (or image retention) is a result of a stationary image being displayed for a long period of time.    <Correction>   Turn off the screen for hours.   <Prevention>   1. Set the display to turn off after a few minutes of system idle under ”Power & Sleep “ (Win10) or “Battery” (Macbook).      2. Turn off the monitor when ...

How to set power lock and menu lock?

On some monitors, there is a power button lock that locks the power and power button in the ON position.  There is also a menu lock feature which can lock and unlock the OSD (On-Screen Display) Menu.  Power Lock: To lock the Power Button press and hold both the [1] button and the down arrow button for 10 seconds.  OSD Lock: ...

How to manually install LED monitor drivers under Win10 64-bits?

If you're not able to install your monitor drivers with the driver pack "Standard Monitor Driver Signed Windows 10 x64 " downloaded from ViewSonic website, please follow below instruction to manually install Win10 x64 driver. 1. Download the attached ZIP file including monitor drivers to your PC and extract it. 2. Under "Control Panel",...

How to solve the overscan problem with my monitor?

If the image does not fill the screen of the monitor or if it looks like the image is slightly too big for the monitor, try below suggestion.   1.Adjust setting on the PC/laptop:   (1)Set native resolution of monitor in your PC/laptop's Display settings.   (2)Change Scaling in Display settings.   Use the graphic card software to change ...