RS232 Communication Setting - Baud Rate Select: 9600bps (fixed) - Data bits: 8 bits (fixed) - Parity: None (fixed) - Stop Bits: 1(fixed) LAN Communication Setting - Type: Ethernet - Protocol: TCP/IP - Port: 5000 (fixed) - Cross subnet: No - Logon Credentials: No
Here’re major steps to set up video wall in portrait position for your reference. 1. Set up monitor ID in OSD menu as 1~4 prior to mounting monitors. 2. Connect IR sensor cable to monitor 1. 3. Connect the PC to monitor 1 with DP cable firstly for easy setup & adjustment afterwards. 4. Mounting monitor 1/2/3/4 in portrait p...
1. Download the attached license file. 2. Select the correct Time Zone. 3. Please follow the below procedures to install the Signage Manager license: license URL:https://support.viewsonic.com/helpdesk/attachments/33040907670
Upgrade under the factory menu Copy MstarUpgrade.bin in USB and Insert U disk to the USB port Press Input menu and then press 2 5 8 0 to activate factory menu (Fig. 1) Move to “Upgrade Main” item and press OK button to confirm. (Fig. 2) Select “Confirm” to confirm the upgrade (Fig. 3), the system will automatically reboot and start the up...
1. Is it correct of RS232 daisy chain cable ? 2. In OSD menu, General settings -> Eco mode please set to Normal. (If set to Low power standby, the unit can power OFF but can’t power ON) 3. The RS232 daisy chain cable is 2.4mm – 2.4mm
Product Cut in S/N EP5520T phase-in from UVE173100001 EP5520 phase-in from T91173300001
Please follow below steps: Click Start and then Control Panel, and next Hardware and Sound. Under Tablet PC Settings, tap Calibrate the screen for pen or touch input. On the Display tab, under Display options, tap Calibrate and then Yes to allow the program to make changes. 4.Select the Touch input option. ...
You can refer below steps to use other widgets.
ViewSonic CDE30 Series power save modes: Which mode should i use? There are four Power Save modes to choose from and knowing which one to use depends on the application. For this scenario we will cover digital signage, information and monitoring systems and meeting rooms where always-on, wake up on active signal and fast boot time is a must...
Model Name CDM series CDE10 series CDE20 series EP5540/T EP5542/T Supported WiFi Dongle Built-in WiFi module LB-WiFi-001 LB-WiFi-001 TL-WN725N TL-WN725N TL-WN725N TL-WN725N VSB050 VSB050 VB-WIFI-001 Note: 1. WPA stands for Wi-Fi Protected Access. 2. All WiFi modules and dongles only support W...