How to disable Auto Pivot function under Windows 10?

You can set the Orientation setting to Landscape/CW90°/CCW90° or disable the “Auto Pivot” application.

Why is my monitor not detected by the Firmware Update Tool?

Please make sure to use “FW_Update_Tool_v1.08”. Please follow the step by step instructions below to resolve the problem. When the program is initialized, the error message shown below will appear. A Windows error message might also pop up few seconds later. Please close the program and the error messages, then follow the in...

Why is the auto-pivot function not able to detect my monitor’s orientation?

The Auto-Pivot function uses DDC/CI to communicate with the monitor.  Please make sure not to turn off the monitor’s DDC/CI option in the OSD menu when you are using the Auto Pivot function.

How to enable the input source auto detect function?

Please open the OSD menu and navigate into “Input Select”. Then, select Auto-Detect and make sure it is set to ON.

Why can’t my monitor automatically detect a source?

The input source auto detect function is only supported by specific model of monitors. Please refer to the user guide to confirm this feature. If your monitor supports this feature, it will be disabled by default. Please make sure to enable it within the OSD menu.

How do I update my monitor's firmware?

For the best display performance and to resolve any known issues, it is best to keep your monitor updated with the latest firmware version. With the USB cable and firmware update tool, you can easily update your monitor firmware any time. To update the firmware, do the following: 1. Click on the Advanced sub-menu, then Information. ...

Where can I get vDisplay Manager?

vDisplay Manager can be downloaded at: http://color.viewsonic.com/ or by clicking here. After the download completes, launch the setup file and follow the on-screen directions to install the software. Once the installation has finished, click on the vDisplay Manager icon to launch the software.

How many monitors can I connect when utilizing the Daisy Chain connection on VP series?

 Please refer to below table:   Model Qty Native Resolution VP2468 4 1080P VP2468a VP2768 VP2768a VP2785-2K VP2771  VP2775 2 2*1440P 3 1*1440P+2*1080P  

How to check the monitor’s current firmware version?

There are 2 ways:   1.On Monitor, please navigate to OSD -> Setup Menu -> Information, where you will see your current firmware version.   **For VP2468 versions M001 and M002, this function is not supported. If the firmware version is not present in the Information page, please update to version M010 or later.     2. On PC/Laptop, you ...

Why can’t my Windows desktop rotate to match the monitor’s orientation when OSD pivot function is set to Auto?

Since OSD pivot function in the OSD menu only affects the OSD menu itself. Please also install vDisplay Manager in your operating system so that your operating system screen can automatically rotate with the monitor’s orientation.

Contact Us

Contact Us directly if you’re unable to get the answers and solutions for your ViewSonic products.