What is tilling mode for Videowall and how to set it correctly?

<Tiling Mode> In Tile Mode you can view an image in a larger scale by connecting multiple monitors.   After all the displays are installed properly to a video wall, you need set the position of each display to determine how to display the input image. Once the position is set, the video source (e.g. computer) identifies the number of connect...

How can I fix EP5520T into floor?

Please refer the attachment. Attachment URL:https://support.viewsonic.com/helpdesk/attachments/33010268005

How to set up video wall in daisy chain?

Here’re major steps to set up video wall in portrait position for your reference. 1. Set up  monitor ID in OSD menu as 1~4 prior to mounting monitors.   2. Connect  IR sensor cable to monitor 1.   3. Connect  the PC to monitor 1 with DP cable firstly for easy setup & adjustment  afterwards.   4. Mounting  monitor 1/2/3/4 in portrait p...

Can my EP5520 support Enterprise authentication with a trusted certificate i.e WPA2 Enterprise with certificate installation?

The supported WIFI security types depend on the WIFI module/dongle you installed.

How to install APP on NMP-302W?

Applied model:  NMP-302W, NMP580-W, EP1042T 1. Click "Advanced" to enter advanced settings page. 2. Click left mouse key three times in the right bottom area with interval of one second 3. Then Android main page will appear 4. Click "Settings" to enter settings page 5. Check "Unknown source" under "Security" setting...

ViewSonic CDE30 Series Power Save Modes: Which Mode Should I Use?

ViewSonic CDE30 Series power save modes: Which mode should i use? There are four Power Save modes to choose from and knowing which one to use depends on the application. For this scenario we will cover digital signage, information and monitoring systems and meeting rooms where always-on, wake up on active signal and fast boot time is a must...

What USB WiFi dongle/adapter will work with commercial displays, the CDM, CDE, EP series?

Model Name CDM series CDE10 series CDE20 series EP5540/T EP5542/T Supported WiFi Dongle Built-in WiFi module LB-WiFi-001 LB-WiFi-001 TL-WN725N TL-WN725N TL-WN725N TL-WN725N VSB050 VSB050 VB-WIFI-001 Note: 1. WPA stands for Wi-Fi Protected Access.  2. All WiFi modules and dongles only support W...

How to Disable the Android System on the CDE20 Series.

1. On the Remote Control press INPUT 9 9 1 to enter factory mode. 2. Select Other Setting in the DEBUG MENU. 3. Select Boot Mode. 4. A dialog box will pop up. Select – Disable Embedded OS. 5. Press OK on the Remote Control and the system will reboot. 

How to upgrade the firmware on Stand type EPoster, EP5520/EP5520T, EP5540/EP5540T, EP5542/EP5542T?

1. Format the USB disk as FAT32. 2. Unzip the “MstarUpgrade_848.zip” and then copy the .bin file to the USB disk (FAT32) in the root directory. 3. In Android mode, press the Source menu button, then press INPUT 9 9 1 to open the Service Menu. 4. Select "Firmware Update" and press OK.  5. Select "Upgrade Main" and press OK. ...

How to find MAC address of EP5520/EP5520T/ EP5540 /EP5540T?

MAC address is available on a label outside the carton as below. If carton is not available, check it under Android system with details below. 1. Press HOME on RC and select Settings 2. Select Network 3. Select Ethernet 4. MAC address listed as below