ViewSonic XG2401/XG2402/XG2701/XG3202-C can support the resolution 1920x1080@144Hz in HDMI. However, to enable 1920x1080@144Hz, there'll be some requirements except for the monitor. 1. Graphics card/Laptop: Must support HDMI 1.4 output with 340MHz pixel clock or HDMI 2.0 output capability. 2. HDMI cable: It's suggested to connect...
This is an indicator about power consumption ratio which is affected by some OSD settings change, ex. ECO mode and Brightness. Here's a matrix table about ECO mode and power consumption ratio. ECO mode Power consumption ratio Standard 100% Optimize 85% Conserve 70%
If the image doesn’t fit the screen, please do the following: 1.Check the applied resolution to make sure that they match the settings recommended in the user guide. To check the resolution in Windows: (1)Settings > Display > Click on the display that user wants to change the setting (2)Change the display resolution for ...
1. Connect the USB cable to the monitors USB Type B port on the back of the monitor and attach the other end of the cable to an available USB port on the computer. Allow 10-15 seconds for the computer to recognize the external webcam. Please do remember to connect the video signal cable between monitor and computer. NOTE: This method will ...
You can refer to this video. 1. Lay the monitor unit face down on a flat surface, using the soft bag received or a soft material to avoid damaging the screen. 2. Insert and align the Neck of the stand (Do NOT attach the base to the neck) into the stand slot on the display. 3. Firmly push the neck into the slot while securing t...
This can be caused by a long cable or docking stations. Longer cables may be prone to ghosting, lines, double images, or poor focus. The improper shielding of the cables can cause a shadowing or ghosting effect also. We recommend to check the video cable and, if possible, use HDMI Premium certificate cable for long distance connectio...
Please refer to this FAQ, find "Calibrate your display" section and follow the instruction.
MacOS does not require monitor drivers when using a ViewSonic monitor. The MacOS will automatically read the EDID information stored in the monitor and use the system information/profiler utility to detect the monitor’s specifications and capabilities. If you can not get native resolution or refresh rate on the monitor: Please check if ...
To output: 1.1080p content at 144Hz, you will need either a dual-link DVI, a DisplayPort, or an HDMI 1.3 or higher cable. 2. 1440p at 144Hz, you will need at least an HDMI 2.0 or a DisplayPort 1.2 cable. 3.4K at 144Hz, you will need a HDMI 2.1 or a DisplayPort 1.4 cable which can carry 120Hz signal without compression.
If you are experiencing problems using HDMI input, suggest do the followings: Please check below on monitor: Make sure the correct HDMI input is selected in OSD. Turn on the monitor first then PC. Please check below on PC: Test the monitor on a different computer with a HDMI port. Replace another HDMI cable. If...