1.Please turn on player’s HDMI CEC function. 2.Connect IFP and player in HDMI cable. 3.Please enable HDMI CEC function under “Setting > Display > HDMI CEC” on IFP. When enabled, HDMI CEC allows devices connected to the ViewBoard via HDMI to turn on automatically when the ViewBoard is turned on. <Note> Not all HDMI ports on IFP suppo...
IFP7550 USB port 3.0 supports external HDD up to 4TB. Below models had pass the read/write test. WD: WDBUY0040BBK(4TB) SEAGATS: STDR2000301(2TB) TOSHIBA: HDTC810YR3AA(1TB) SONY: HD-E1(1TB)
The default time zone is +8 which can be changed at the initial setting stage by Set up wizard of ViewBoard Launcher. It will be auto sync-up later with internet connection.
No, CDE7061T VGA Out only bypass the signal from VGA in 1 and VGA in 2, the annotation won’t be shown on second display.
Please download the touch driver for Mac in below link or visit the product page on our website. IFP 50-1/50 Gen 1: Download IFP 30: Download IFP 50-2/50-2 EP/50 Gen2/50-3/50-3A/50-3B/50-3 Gen 3/70: Download
Applied model 1. Americas: IFP**50 - Gen 1, IFP**50 - Gen 2, IFP**50 - Gen 3, IFP**70 2. Asia Pacific & Africa: IFP**50, IFP**50-2, IFP**50-3, IFP**70 3. Europe: IFP**50, IFP**50-2EP, IFP**50-3EP, IFP**70 Please use remote control to enter debug menu via pressing INPUT 9 9 1 in sequence, then go to Other Setting--àUSB Disk Enable a...
Applied model: 1. Americas: IFP**50 - Gen 1, IFP**50 - Gen 2, IFP**50 - Gen 3. 2. Asia Pacific & Africa: IFP**50, IFP**50-2, IFP**50-3. 3. Europe: IFP**50, IFP**50-2EP, IFP**50-3EP. . Please refer either method below: You will need to set combination key to “ON” at Debug menuàOther Settingà Combination key. Then the font panel but...
1. Purchase the product key online or via Microsoft distributor. 2. Once you have the key, click “Start > Settings > Update & security > Activation > Change the product key”, then enter the new product key then click Next to Activate.
1. Use a RS232 crossover adapter (except: IFP34 series, IFP52-1C series, IFP110) for RS232 control. 2. Make sure to set the communication settings below correctly 3. If you connect from PC, please make sure the com port is correctly chosen. 4. It's recommended to vController to control the Viewboard by RS232. Please r...
Step 1: Confirm correct input source on the ViewBoard (IFP) Press the [Input Source] button on the IFP remote or touch menu. Select the matching input (e.g., HDMI1 / USB-C / VGA). Wait 5–10 seconds for the screen to detect input. Step 2: Check your cable and connection type Try another HDMI, USB-C, or VGA cable. If using USB-C...