This happens because vCast requires a license key to activate. Please ensure your Viewboard is connected to the internet to get “Registration OK” to show on screen to work.
You can use the Recovery button that locate at VPC front panel to recovery the OS system.
1. Find your product's model number and visit ViewSonic's website to download the firmware. 2. Save the *.zip file to a local disk. 3. Extract the firmware files to a USB drive. a. For Gen. 1 units (IFPxx50), extract 'upgrade_510’ folder to the root of your USB drive (FAT32). b. For Gen. 2 units (IFPxx50-2/IFP50-2 EP), extract ‘upgrade_5...
Below apps will be displayed in the ViewBoard vLauncher with firmware date after Jan/2021.
ViewSonic’s IFP6570 and IFP8670 USB Type-C port supports the below specifications: 1. DP alt mode: supported with DP1.4 (4K@60hz) 2. Power delivery specification: 60W (5V3A、9V3A、12V3A、15V3A、20V3A) 3. USB data transfer rate specification: USB 2.0 (480 Mbps) Note: USB Type-C refers to the connector type, not the capability of...
1. You need to switch the Standby Mode to "Sleep" On IFP50. Please refer to this FAQ if you can not switch to this mode. 2. You can now use RS232 LAN command to power On/Off the IFP50 series.
Please refer to the attached PDF. URL:https://support.viewsonic.com/helpdesk/attachments/33046905099
You can press FREEZE button on remote control to freeze the screen.
Applied model 1. Americas: IFP**50 - Gen 1, IFP**50 - Gen 2, IFP 9850-3 2. Asia Pacific & Africa: IFP**50, IFP**50-2, IFP 9850-3 3. Europe: IFP**50, IFP**50-2EP,. IFP 9850-3 EP Please update IFP to the latest FW version via OTA or by USB file from ViewSonic website. Then you can select sleep without key file.
ViewBoard 2.1 will automatically be activated when PC/laptop connects to IFP50/70 with an USB touch cable or please purchase a key to get it activated permanently.