What to do if there is flickering image with my monitor?

Check the monitor: Please do memory recall. Please refer to this FAQ Check device setting: Please check and set to recommended refresh rate.  You can refer to this video. https://www.youtube.com/watch?v=sAkbjPiLNcE   If possible, please connect monitor to another device with different input.   If above doesn’t help, please contact ViewSo...

How to do color calibration with my monitor?

Please refer to this FAQ, find "Calibrate your display" section and follow the instruction.

Why Auto Image Adjust function is gray out in monitor OSD?

When using a monitor in the digital (HDMI, DisplayPort) connection, Auto Image Adjust and Manual Image Adjust settings may be disabled. This is normal as the monitor will adjust itself when in the digital mode.

How to manually install LED monitor drivers under Win10 64-bits?

If you're not able to install your monitor drivers with the driver pack "Standard Monitor Driver Signed Windows 10 x64 " downloaded from ViewSonic website, please follow below instruction to manually install Win10 x64 driver. 1. Download the attached ZIP file including monitor drivers to your PC and extract it. 2. Under "Control Panel",...

What to do if there is vertical or horizontal line on my monitor?

1.If the line location is not fixed, please check and adjust firstly by following below methods:   (1) Check the video cables and/or another video input. Make sure the cable is securely connected and if possible, change the cable.   (2) Use another power outlet.   (3) Connect the monitor to another computer.   2. If the line location is...

Should I install MacOS drivers for my monitor?

MacOS does not require monitor drivers when using a ViewSonic monitor. The MacOS will automatically read the EDID information stored in the monitor and use the system information/profiler utility to detect the monitor’s specifications and capabilities.  If you can not get native resolution or refresh rate on the monitor:   Please check if ...

Which Cable Do I Need For 144Hz?

To output:   1.1080p content at 144Hz, you will need either a dual-link DVI, a DisplayPort, or an HDMI 1.3 or higher cable.    2. 1440p at 144Hz, you will need at least an HDMI 2.0 or a DisplayPort 1.2 cable.   3.4K at 144Hz, you will need a HDMI 2.1 or a DisplayPort 1.4 cable which can carry 120Hz signal without compression.

What to do when no video by using HDMI port?

If you are experiencing problems using HDMI input, suggest do the followings:   Please check below on monitor:   Make sure the correct HDMI input is selected in OSD. Turn on the monitor first then PC.   Please check below on PC:    Test the monitor on a different computer with a HDMI port. Replace another HDMI cable. If...

Why does image persistence occur with my LCD monitor?

Image persistence (or image retention) is a result of a stationary image being displayed for a long period of time.    <Correction>   Turn off the screen for hours.   <Prevention>   1. Set the display to turn off after a few minutes of system idle under ”Power & Sleep “ (Win10) or “Battery” (Macbook).      2. Turn off the monitor when ...

How to setup dual monitors on a computer?

Dual monitor setup is simple to configure on modern computers. Windows will automatically detect and configure the displays. Requirement:   1. Windows 7 or later. 2. A PC or laptop with at least 2 video out ports.  3. 2 monitors.   After connected 2 monitors to 2 video out ports, Windows will automatically load the drivers and present a...