- Eingangssignal
Frequenz: Fh: 30 - 70kHz,
Fv: 50 - 160Hz
Video: RGB Analogue (0.7V/1.0Vp-p, 75 ohms)
Synchronisierung: H/V separated (TTL), composite
- Anschlüsse
Stromversorgung: 3-pin plug (IEC320)
Signal: 15 pin mini D-sub, attached cable
- Stromversorgung
Spannung: AC 90 - 264V, 50/60Hz (auto switch)
Verbrauch: 75W (typ.), < 2 watt in power save mode
- Bedienungselemente
Grundausstattung: Power on/off, Key 1, Key 2, up, down
OSD: Contrast, Brightness, zoom, H/V Size, H/V Position, Pin-balance, Pincushion, Parallel, Trapezoid, Rotation, moiré reduction, degauss, ViewMatch colour adjust (9300K, 6500K, 5000K, User), mode information (ViewMeter), language, memory recall
- Betriebsbedingungen
Temperatur: 0°C to 40°C
Feuchtigkeit: 5% to 95% (no condensation)
- Gewicht
Netto: 14kg
- Videoeingang
Bandbreite: 120MHz (Typical)
- Energieverwaltung
Meets MPR II
- Röhrenmonitor
Typ: 43cm / 17" (16" diagonal viewable area), 90°deflection
Punktraster: 0.27mm dot pitch
Phosphor: RGB P22 medium/short persistence
Glasfläche: Anti-static, anti-glare, AR coat (TM=50%)
- Plug & Play
DDC1, DDC2B
- MISCONVERGENCE
0.25mm (max.) at centre
0.35mm (max.) at corner
- Anzeigefläche
Werkseinstellungen: 310mm (H) x 230mm (V) (typ.)
Maximum Scan: 325mm (H) x 243mm (V) (depending on signal timing used)