How to set power lock and menu lock?

On some monitors, there is a power button lock that locks the power and power button in the ON position.  There is also a menu lock feature which can lock and unlock the OSD (On-Screen Display) Menu.  Power Lock: To lock the Power Button press and hold both the [1] button and the down arrow button for 10 seconds.  OSD Lock: ...

Should I install Windows 10 drivers for my monitor?

ViewSonic plug and play monitors do not require a proprietary Windows 10 driver to be installed.   Instead, Windows 10 will automatically read the EDID information stored in the monitor and install Generic PNP Monitor drivers to enable its full resolution capabilities.   The only difference is you will see monitor model name in Device Manag...

How to restore the default settings of my monitor?

Please follow below steps:   Open OSD menu:               (1) For monitors with [1] and [2] buttons on the front panel, press the number “1” button on the                     monitor.               (2) For monitors with buttons behind the monitor, press the second button from the top.                (3) For monitors with a joystick...

How to set landscape and portrait Mode?

Several ViewSonic LCD panels support both Landscape and Portrait modes.  If your LCD panel supports this feature, you can switch modes by turning the screen as shown in the diagram below. To change the image on the Windows Desktop, follow instructions below: Open the Start menu and click "Control Panel." Click "Adjust Screen Resolution"...

What to do when no video by using HDMI port?

If you are experiencing problems using HDMI input, suggest do the followings:   Please check below on monitor:   Make sure the correct HDMI input is selected in OSD. Turn on the monitor first then PC.   Please check below on PC:    Test the monitor on a different computer with a HDMI port. Replace another HDMI cable. If...

How to solve the overscan problem with my monitor?

If the image does not fill the screen of the monitor or if it looks like the image is slightly too big for the monitor, try below suggestion.   1.Adjust setting on the PC/laptop:   (1)Set native resolution of monitor in your PC/laptop's Display settings.   (2)Change Scaling in Display settings.   Use the graphic card software to change ...

Where to find serial number of the monitor?

The serial number can usually be found on the back or bottom of your product and is either 10 or 12 digits long. The serial number can also be found on the original box of the unit.

How to check graphics card drivers in Windows?

1.Under "Control Panel", open "Device Manager". 2. Find the Display adapters and double click on it then double click on the device shown: 3.Select Driver tab, this will list the Driver version.

How to solve the problem with my monitor as it turns off automatically?

If the monitor turns on briefly, then turns off, check the following: Make sure the power cable is securely connected. Turn off the monitor, unplug the power cable for 15 seconds and plug the power cable back then turn on. Check the video cable and make sure it is connected on both ends securely.           Reset the factory default ...

What to do if there is vertical or horizontal line on my monitor?

1.If the line location is not fixed, please check and adjust firstly by following below methods:   (1) Check the video cables and/or another video input. Make sure the cable is securely connected and if possible, change the cable.   (2) Use another power outlet.   (3) Connect the monitor to another computer.   2. If the line location is...