Should I install MacOS drivers for my monitor?

MacOS does not require monitor drivers when using a ViewSonic monitor. The MacOS will automatically read the EDID information stored in the monitor and use the system information/profiler utility to detect the monitor’s specifications and capabilities.  If you can not get native resolution or refresh rate on the monitor:   Please check if ...

Why can’t I run ViewSplit when connected to ViewSonic monitor?

Your ViewSonic monitor must be set to the Main display. To verify this please follow the steps below:     1. Right click on your desktop and select “Display Settings”.      2. Click on the display number at the top that you want to make the main display and check the “Make this my main display box” under Multiple displays.    3. If th...

How to Install Unsigned Drivers in Windows 10

When installing unsigned drivers on Windows 10, Windows pops up a warning saying Windows can’t verify the publisher of this driver software.        The following are instructions on how to install unsigned drivers in Windows 10.    NOTE: Checking driver signatures is a security feature in Windows, and disabling it is not rec...

How to set a Monitor Webcam as the Primary Camera on macOS?

1. Connect the USB cable to the monitors USB Type B port on the back of the monitor and attach the other end of the cable to an available USB port on the computer. Allow 10-15 seconds for the computer to recognize the external webcam. Please do remember to connect the video signal cable between monitor and computer.   NOTE: This method will ...

How to Enable 180Hz Refresh Rate on my ViewSonic monitor?

To enable 180Hz refresh rate on your monitor, you need to turn on Overclocking in the monitor's On-Screen Display (OSD) Menu. After turning on Overclocking, you then can set the refresh rate to 180 Hz under your computer's “Display” settings. For example, in Windows go to Settings > System > Display >  Advanced display to set the refr...

How to output video at 120Hz from PS5 or Xbox Series X/S to ViewSonic monitors?

The new gaming consoles from Sony and Microsoft support video ouput up to 120Hz. Please follow below instructions to enable 120Hz on your console. <PlayStation 5> 1. Open "Settings". 2. Select "Screen and Video". 3. Select "Enable 120 Hz Output" in "Video Output". 4. Select "Automatic" in the pop-up menu. ...

How to enable AMD FreeSync?

To use AMD Freesync, there're some requirement with graphics cards, graphics drivers and certified monitors. 1. A compatible GPU with a DisplayPort connection. Compatible GPUs include all AMD Radeon™ graphics cards beginning with Radeon™ HD 7000 Series, released in 2012, and all newer Radeon consumer graphics products.Other GPUs, such ...

How can I select 165Hz on XG2703-GS?

You can navigate to manual Image adjust on OSD menu.   Select Overclocking -> 165Hz.    

Can I Calibrate my sRGB or AdobeRGB monitor’s Luminance value below 80cd/m^2?

Can I Calibrate my sRGB or AdobeRGB monitor’s Luminance value below 80cd/m^2?   NO

Why does brightness go down on VP2785-4K while calibrating?

Why does brightness go down on VP2785-4K after calibration?   Because on VP2785-4K, Energy saving is set to ON by default for power saving.     Please turn off the Energy saving to OFF and proceed with calibration.