Applied model: 1. Americas: IFP**50 - Gen 1, IFP**50 - Gen 2, IFP**50 - Gen 3. 2. Asia Pacific & Africa: IFP**50, IFP**50-2, IFP**50-3. 3. Europe: IFP**50, IFP**50-2EP, IFP**50-3EP. Please refer either method below: 1.You will need to set combination key to “ON” at Debug menuàOther Settingà Combination key. Then the touch fun...
You can disable the “Touch and Annotate from Mobile” function in setting.
Please configure the networks firewall settings to grant pass-through authentication to IFP7550.
Yes, IFP7550 can play 4K2K content.
To disable Airplay Service in vCast do the following： Open vCastReceiver on the IFP Select Settings (Gear icon) Select iOS Advance Settings Uncheck Airplay Service To enable Airplay follow steps 1-3 and check Airplay Service
IFP50 has a feature of “Wake on active source” to wake up from standby mode when there is an external HDMI/VGA signal input. Supported input sources: 1.IFP50-1/Gen 1 and 50-2/Gen 2/50-2 EP: HDMI and VGA 2.IFP50-3/Gen 3: HDMI.
Please refer to attached file to create a power on/off run script to remote control IFP 50-1(Gen. 1) ,power on/off. File URL:https://support.viewsonic.com/helpdesk/attachments/33012153643
The default time zone is +8 which can be changed at the initial setting stage by Set up wizard of ViewBoard Launcher. It will be auto sync-up later with internet connection.
Yes, IFP7550 integrated a HDMI output port which is capable of being installed by Daisy Chain. For more details, please refer to the User Guide.
Applied model 1. Americas: IFP**50 - Gen 1, IFP**50 - Gen 2, IFP**50 - Gen 3, IFP**70 2. Asia Pacific & Africa: IFP**50, IFP**50-2, IFP**50-3, IFP**70 3. Europe: IFP**50, IFP**50-2EP, IFP**50-3EP, IFP**70 Please follow below instructions to disable the Embedded Player. Press INPUT 9 9 1 in sequence on the remote to enter the Debug M...