Answer: No. There is no trolley option offered at this time. The current available trolley options are for the 108", 135", 163" DVLED sizes.
Answer: "Hard calibration" is a form of hardware calibration that fine tunes the color and brightness for specific LED modules on the DVLED Display. Situations in which hard calibration may be required: LED Module position is changed or LED Module is replaced with a spare, LED Modules from a different color batch need to be used, LED M...
Solution The signal will be sent from the “Main Board” and transmitted in three ways: 1) The first path is from the “Audio Board” to the “Speaker” 2) The second path is to the “RS232 Module” 3) The third path is from the “Transfer Board” to the “Receiving Board,” and from the “Receiving Board” to the “LED Module.” ...
Answer: Chip-on-Board or "COB" refers to the mounting of a bare LED chip in direct contact with a substrate, to produce LED arrays. Differences between SMD LED and COB LED consists of: SMD COB Horizontal Chip Flip Chip has LED PCB does NOT have LED PCB (smaller chip) has gold wires does NOT have gold wires (less blockage of light)...
Answer: Generally speaking, low-end LED displays do not have a power protection mechanism and are more susceptible to damage. Users should avoid repeatedly turning on/off the power to avoid damaging the display for all models.
Answer: LED displays do not have a fixed power consumption and are rarely at maximum power consumption. Therefore, power consumption will vary. Maximum power consumption will be achieved for pixels emitting white light. Pictures with more white light will result in higher brightness, therefore, consuming more power. Higher overall bri...
Product installation conditions: 1. Installed in a well-ventilated area, indoors. 2. Ideal ambient room temperature at 22℃±10℃, with an ideal relative humidity of 25% to 75% without condensation. 3. Installation location is more than three meters away from air conditioning. 4. Installation location is away from heat sources (e.g. radiators...
Power Consumption will vary by model. Please refer to the table below to see full power consumption details for the listed dvLED products: LDM108-121 Normal 1330W Max 1900W (White Pattern, Brightness 100%) ≈570W(256 Grey Pattern, Brightness 100%) LD135-151 Normal: 2030W Max 2900W (White Pattern, Brightness 100%) ≈870W(256 Grey Pa...
Flight case dimensions and weight will vary by model. Please refer to the table below for Flight Case dimensions and weight by dvLED product: LD108-121 LD135-151 LD163-181 LD216-251 Dimensions (W x D x H) 58” x 27” x 34” (1470 x 850 x 680 mm) 71” x 30” x 34” (1800 x 850 x 745 mm) 83” x 32” x 34” (2100 x 850 x ...
Refer to the tables below for dimensions and weight by dvLED product. LD108-121 Width Height Distance Weight w/o wall mount 95.31” (2420.8mm) 57.81” (1468.45mm) 1.38” (35mm) 194.01 lb (88 kg) With wall mount 95.31” (2420.8mm) 57.81” (1468.45mm) 2.2” (56mm) 209.44 lb (95kg) LD135...