Why can’t my monitor automatically detect a source?

The input source auto detect function is only supported by specific model of monitors. Please refer to the user guide to confirm this feature. If your monitor supports this feature, it will be disabled by default. Please make sure to enable it within the OSD menu.

Why didn't my Windows desktop automatically rotate to fit the orientation of the monitor when the Auto-Pivot function is enabled on my Windows OS?

For optimal performance, please make sure your monitor is fully up to date. If your VP2468 monitor’s firmware version is M001 or M002, please make sure your OSD Pivot and Auto-Pivot functions are, both, set to Auto.

Do VP series monitors support an Apple MAC Thunderbolt connection?

You can refer to this article to identify the port of your Mac device. Identify the ports on your Mac  1.Mac with Thunderbolt 2:  Please use a mini DisplayPort cable to connect between your Mac to VP monitor’s mini DP or DP input.   2.Mac with Thunderbolt 3:    Please use a Thunderbolt 3 or USB Type-C cable capable of DP ALT mode betw...

How to enable the input source auto detect function?

Please open the OSD menu and navigate into “Input Select”. Then, select Auto-Detect and make sure it is set to ON.

How many monitors can I connect when utilizing the Daisy Chain connection on VP series?

 Please refer to below table:   Model Qty Native Resolution VP2468 4 1080P VP2468a VP2768 VP2768a VP2785-2K VP2771  VP2775 2 2*1440P 3 1*1440P+2*1080P  

How to set the OSD pivot feature to auto when it is greyed out in the OSD menu?

Temporarily select a different OSD rotation option and then set the Auto option again. If the option is still greyed out, apply All Recall from the monitor’s OSD Setup Menu.

Minor image retention may occur when a static image is displayed on the screen for extended periods of time.

This is a normal occurrence for In-Plane Switching (IPS) monitor panels. The longer an image is left static on the screen, the more noticeable image retention will be.  In order to prevent image retention, enable the screen saver function on your monitor so that images are not static on your screen for extended periods of time.

Why is my monitor not detected by the Firmware Update Tool?

Please make sure to use “FW_Update_Tool_v1.08”. Please follow the step by step instructions below to resolve the problem. When the program is initialized, the error message shown below will appear. A Windows error message might also pop up few seconds later. Please close the program and the error messages, then follow the in...

Why didn’t the OSD menu auto rotate to match the monitor’s orientation?

The monitor’s OSD pivot function is only effective for the OSD window itself. Additionally, the vDisplay Manager software will be required for the operating system to automatically adjust the monitor’s orientation.

How to check the monitor’s current firmware version?

There are 2 ways:   1.On Monitor, please navigate to OSD -> Setup Menu -> Information, where you will see your current firmware version.   **For VP2468 versions M001 and M002, this function is not supported. If the firmware version is not present in the Information page, please update to version M010 or later.     2. On PC/Laptop, you ...