This can be caused by a long cable or docking stations. Longer cables may be prone to ghosting, lines, double images, or poor focus. The improper shielding of the cables can cause a shadowing or ghosting effect also. We recommend to check the video cable and, if possible, use HDMI Premium certificate cable for long distance connectio...
Check the monitor: Please do memory recall. Please refer to this FAQ Check device setting: Please check and set to recommended refresh rate. You can refer to this video. https://www.youtube.com/watch?v=sAkbjPiLNcE If possible, please connect monitor to another device with different input. If above doesn’t help, please contact ViewSo...
When using a monitor in the digital (HDMI, DisplayPort) connection, Auto Image Adjust and Manual Image Adjust settings may be disabled. This is normal as the monitor will adjust itself when in the digital mode.
ViewSonic plug and play monitors do not require a proprietary Windows 10 driver to be installed. Instead, Windows 10 will automatically read the EDID information stored in the monitor and install Generic PNP Monitor drivers to enable its full resolution capabilities. The only difference is you will see monitor model name in Device Manag...
Please refer to the video on how to change: https://www.youtube.com/watch?v=sAkbjPiLNcE
Dual monitor setup is simple to configure on modern computers. Windows will automatically detect and configure the displays. Requirement: 1. Windows 7 or later. 2. A PC or laptop with at least 2 video out ports. 3. 2 monitors. After connected 2 monitors to 2 video out ports, Windows will automatically load the drivers and present a...
Several ViewSonic LCD panels support both Landscape and Portrait modes. If your LCD panel supports this feature, you can switch modes by turning the screen as shown in the diagram below. To change the image on the Windows Desktop, follow instructions below: Open the Start menu and click "Control Panel." Click "Adjust Screen Resolution"...
General Precautions Make sure the monitor is turned off and the power cable is unplugged from the power outlet. Never spray or pour any liquid directly onto the screen or case. Doing so could damage your monitor. Dust or hard materials may scratch the screen. Please make sure the cleaning cloth is free of any debris. Clean and dry the m...
1.Under "Control Panel", open "Device Manager". 2. Find the Display adapters and double click on it then double click on the device shown: 3.Select Driver tab, this will list the Driver version.
If you are experiencing problems using HDMI input, suggest do the followings: Please check below on monitor: Make sure the correct HDMI input is selected in OSD. Turn on the monitor first then PC. Please check below on PC: Test the monitor on a different computer with a HDMI port. Replace another HDMI cable. If...